♥Endless Story♥

Endless Story
©Barbara Butler
August 2013

Materials
Scrap Kit:  Endless Story By Rissa Designs
Mask:  Mask52 by MB and SW
Tube:  I'm using a Pinuptoon.  You can fine her and others at CDO.  Please do not use without buying the tube and having the proper license to do so.


Instructions:
all elements will be resized by 75% unless other wised stated.

New Image:
800x600 72dpi

Paper07:
Select all.  Paste into selection.  Select none.  Apply mask and merge mask group.  Duplicate 3 times.  Merge all three layers together.

Paper02:
Select all.  Add a new layer and paste paper into selection.  Select none.  Apply the same mask as before and merge the mask group.  Change the blend mode to multiply.

Book:
Paste on to canvas.  Resize three times.  Rotate 15 degrees to the left.  Place on the right side.

Bird:
Paste on to canvas.  Resize by 50% and place on the left side of the book.

Bag:
Paste on to canvas.  Resize by 50%, mirror and place behind the bird.

Butterfly:
Paste on to canvas.  Resize by 50% and place on the top left.

Fan:
Paste on to canvas.  Resize by 50% then by 75%.  Rotate 15 degrees to the right.  Place in the bottom left.

Frame03: 
Paste on to canvas.  Resize.  Rotate 15 degrees to the left.  With the magic wand click on the inside of the frame.  Expand by 4.  Paste Paper03 into selection.  Select none and move the paper layer below the frame in the layer palette.

Kitty:
Paste on to canvas.  Resize twice and place in front of the fan.

Lace:
Paste on to canvas.  Now we're going to use this to frame the outside of the frame if you want to resize now you can or you can wait until you have all your pieces into place.  You'll want four pieces merge all the pieces together after you get them to size you like, and on the bottom you'll need to erase the excess off.  And if need be move any elements to hide some of the bottom.  You can also use your deform tool to stretch it out a bit.

Lamp:
Paste on to canvas.  Resize and place behind the fan.

Right Side elements:
Resize each by 75% and rotate the book by 15 degrees to the left.

Tube:
Paste on to canvas.  Resize as needed.  Add copyright.

Finishing Touches:
I added a dropshadow to the frame but you dont have to.  Add name and save as a pspimage.  Crop and resize as needed and save as a png and you are done.

Thank you for taking a look at my tut.  Any comments are greatly appreciated.

♥Sweet Cherries♥

Sweet Cherries

©Barbara Butler

August 2013

Materials:

Scrap Kit:  Cherry Cuppies by Rissas designs Here

Template:   Template74 also by Rissas designs 

Mask:  WSLMask84

Tube:  Red_Rose by Alehandra Vanhek.  She can be found at PFD.  Please do not use without buying her and having the proper license.

Instructions:

See my tag for placement of elements.

Template:  Open, duplicate and close the original.  Delete the copyright layer.  Make sure the template is at 72dpi to stay within artists TOU.

Raster5:  Select all>float>defloat.  Paste Paper10 as a new layer, invert and hit delete.

Raster4:  Select all>float>defloat.  Paste Paper5 into selection.

Raster3:  Select all>float>defloat.  Paste Paper1 into selection.

Raster2:  Select all>float>defloat.  Paste Paper4 as a new layer, invert and hit delete.

Raster1:  Select all.  Paste Paper 2 into selection.  Apply the mask.

FlowerVine:  Paste on to canvas.  Place to the left.  Resize by 64%.

Fan:  Paste on to the canvas.  Resize by 64% and place behind the vine.

Cupcake4:  Paste on to canvas.  Resize by 64% twice.

CherryBranch:  Paste on to canvas.  Resize by 64% twice.

Butterfly1:  Paste on to canvas.  Resize by 64% twice.  Rotate 15 degrees to the right.

Butterfly2:  Paste on to canvs.  Resize by 64% and mirror it.

Candy:  Paste on to canvas.  Resize by 64% twice and mirror it.

CakePops:  Paste on to canvas.  Resize by 64% twice.

IceCreamTreat:  Paste on to canvas.  Resize by 64% then by 75%.

Tube:  Paste on to canvas.  Resize as needed.  Add copyright.

Finishing Touches:  Add name.  Save as a pspimage.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Any comments is greatly appreciated.

Pretty Little Thing

Pretty Little Thing

©Barbara Butler

August 2013

Materials:

Scrap Kit:  Make Me Pretty By Rissa's Designs 

Template:  Missy_Template180 By Missy can fine it at divineintentionz.blogspot.com

Tube:  I'm using the artwork of Alex Prihodko.  Please do not use without buying it and having the proper license.

Instructions:

Template:  Open template, duplicate it and close the original.  Delete the copyright layer.

Circle:  Select all>float>defloat.  Paste Paper3 into selection.  Select none.

Thin Rectangle1:  Select all>float>defloat.  Paste Paper5 as a new layer, invert selection and hit delete.  Select none.

Thin Rectangle2:  Select all>float>defloat.  Paste Paper6 as a new layer, invert selection and hit delete.  Select none.

Thin Rectangle3:  Select all>float>defloat.  Paste Paper4 as a new layer, invert selection and hit delete.  Select none.

Circle Background:  Select all>float>defloat.  Paste Paper4 as a new layer again, invert and hit delete.  Select none.

Circle1:  Select all>float>defloat.  Add a new layer and paste Paper2 into selection.  Select none.  

Circle2:  Select all>float>defloat.  Add a new layer and paste Paper1 into selection.  Select none.

Dressing Table:  C&P on to canvas.  Resize by 50%.  With magic wand click on the empty spot on the stool expand the selection by 1. Paste Paper4 as a new layer invert and hit delete.  Select none.  Add an inner bevel of choice to make it look like a cushion.  Move this layer below the table.  Merge the two together.  Resize by 75% and move to the right.   Now click on the inside of the oval part and paste Paper6 as a new layer invert and hit delete.  Move this layer below the table and merge the two layers.

Fan:  C&P on to canvas.  Resize by 50% twice.  Place on the left.  Rotate 15 degrees to the left.

Pillow:  C&P on to canvas.  Resize by 50% twice.  Place it behind the fan.

Martini:  C&P on to canvas.  Resize by 50% twice.  Place in front of the fan and to the left.

Candle:  C&P on to canvas.  Resize by 50% twice then by 75%.  Place to the right of the fan.  Paste the candle again.  Resize this one by 50% twice.  And place to the right of the first one and in the layer palette move it down.

Butterfly1:  C&P on to canvas.  Resize by 50% twice.  Place to your liking.

Lipstick:  C&P on to canvas.  Resize by 50% twice.  Place behind the martini glass and on the left side of it.

Umbrella:  C&P on to canvas.  Resize by 50%.  Move behind the other elements on the left.

Winged Lips:  C&P on to canvas.  Resize by 50%.  Move in front of the bottom circle.

Strawberry:  C&P on to canvas.  Resize by 50% twice.  And place on the right side of the winged lips.

Tube:  C&P on to canvas.  Resize as needed.  Place to your liking.  Add copyright.

Finishing Touches:  Add name (do not convert to a raster layer just yet), save as a pspimage.  Now convert to a raster layer and add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Any comments are greatly appreciated.

Beach Candy

Beach Candy

©Barbara Butler

August 2013

Materials:

Scrap Kit:  Candy Beach By Rissa Designs can be found Here

Tube:  Roxy by Ellie Milk can be found at PFD.   Please do not use without buying it and having the proper license.

Instructions:

New image 900X600.  See my tag for element placement.

Sand:  C&P on to the canvas.

Deck Chair:  C&P on to the canvas.  Resize by 50%.

Bottle:  C&P on to the canvas.  Resize by 50%.

Butterfly:  C&P on to the canvas.  Resize by 50%.  Mirror and place behind the chair.

Palm Tree:  C&P on to the canvas.  Resize by 75%.  Place behind the other elements.

Seagull:  C&P on to the canvas.  Place right beside the palm tree.

Flowers:  C&P on to the canvas.  Resize by 50% then by 75%.  Place between the chair and bottle.

Candy:  C&P on to the canvas.  Resize by 50% then again by 75%.  Place at the foot of the chair.

Seashell1:  C&P on to the canvas and send to the bottom.

Tube:  C&P on to the canvas.  Resize as needed.  Place where you think it looks best.  Add copyright.

Finishing Touches:  Add name (do not convert to raster layer).  Save as a pspimage.  Convert it to a raster layer.  Crop and resize as needed and save as a png.  And you are done.

Thank you for taking a look at my tut.  Any comments is greatly appreciated.

Its A Jungle Out There

It's A Jungle Out There

©Barbara Butler

August 2013

Materials:

Scrap Kit:  It's My Jungle By Rissa Designs can be found Here.

Tube:  I'm using Leo by Pinuptoons.  You can fine it at CDO please do not use without buying it and having the proper license to do so.

Instructions:

New Image 800x600

Grass:  C&P on to the canvas.  Resize by 75% twice.  Move down just a little bit.

Hippo:  C&P on to the canvas.  Resize by 50%.  Place to the left of the grass.

Giraffe:  C&P on to the canvas.  Resize by 75%.  Place behind the hippo.

Lion:  C&P on to the canvas.  Resize by 50%.  Place between the hippo and giraffe.

Log:  C&P on to the canvas.  Resize by 50%.  Place on the right side of the grass.

Meerkat:  C&P on to the canvas.  Resize by 50%.  Place on top of the log.

Monkey:  C&P on to the canvas.  Resize by 50%.  Place in front of the log.

Frame5:  C&P on to the canvas.  Move it below the other elements.  Now you're going to want to draw a circle on the inside.  You can either use the preset shape or your selection tool which ever is easier for you.  Draw a circle on the inside of the frame then C&P Paper11 as a new layer (If you used the preset shape you're gonna want to use your magic wand to click on the inside of the circle first).  Invert and hit delete.   Select none.  Move the paper layer below the frame.  If you have some of the paper going outside of the frame on the sides the other elements will cover it up.

Tube:  C&P on to the canvas.  Resize as needed.  Add copyright

Finishing Touches:  Add name and save as a pspimage.  Crop and resize as needed and save as a png. 

Thank you for taking a look at my tut.  Any comments are appreciated.

Pixie Hollow

Pixie Hollow

©Barbara Butler

August2013

Materials:

Scrap Kit:  Faery Dust can be found Here.

Tube:  Firefly Moon by Tiffany Toland Scott can be found at CDO

Instructions:

New Image 800x600

RD01:  C&P on to the canvas.  Resize by 50%.  Place in the bottom left corner.

RD05:  C&P on to the canvas.  Resize 75% and place behind the mushroom house.

RD08:  C&P on to the canvas.  Resize twice once by 50% then by 75%.  Mirror and place in the bottom right corner.

RD14:  C&P on to the canvas.  Resize by 50% and again by 75%.  

RD17:  C&P on to the canvas.  Resize by 50% and place to the right of the road.  C&P one more time resize this one by 50% and again by 75% mirror and rotate 15 degrees to the right and place just above the first one, so it looks like they're growing on the side of the road.  Merge the two down.  Duplicate>mirror>flip vertical>move to the left side.

RD16:  C&P on to the canvas.  Resize by 25% place behind the bench.  Go back to the bench and resize again by 75%.

RDPaper09: C&P on to the canvas and send to the bottom.

RD23:  C&P on to the canvas.  Duplicate>Mirror and move over so the tops look like they form a heart.  Merge these two together.

RD02:  C&P on to the canvas.  Resize by 75% twice.  Place between the heart.

Embelishments:  Add a drop shadow to the following elements.  The RD02, RD23, RD05

Tube:  C&P on to the canvas.  Resize as needed.  Add copyright.   

Finishing Touches:  Add name do not convert to a raster layer yet.  Save as a pspimage.  Convert name to a raster layer add any effects you want (i use eye candy gradient glow), and a drop shadow of choice.  Save as a png and you are done.

Thank you for taking a look at my tut.  Remember any comments is greatly appreciated.

Witchy Pooh

Witchy Pooh

©Barbara Butler

July2013

Materials:

Scrap Kit:  WitchyPoo by Rissas Designs can be found Here.

Mask:  WSL323

Instructions:

New canvas 800x600

Paper11:  Copy and paste on to canvas>Load Mask from disk>apply WSL323 mask>merge mask group.

Kitty Witch:  Copy and paste on to canvas.  Resize by 50% and place on the bottom left of the mask.

BatInABox:  Copy and paste on to canvas.  Resize by 50% and place behind the Kitty Witch on the right side of it.

Broom:  Copy and paste on to canvas.  Resize by 65%.  Place behind the Kitty Witch.  Rotate 15 degrees to the left.

Haunted House:  Copy and paste on to canvas.  Place behind the other three elements.

Sign:  Copy and paste on to canvas.  Resize by 65% and place to the right of the other elements.

Spooky Tree:  Copy and paste on to canvas.  Resize by 65% twice.  Place on the right side of the sign.

Witchy Pumpkin:  Copy and paste on to canvas.  Resize by 50%.  Place behind the tree to the left.

Tube:  Copy and paste tube of choice.  I'm using Witchy Pooh by Ismael Rac.  Please do not use without buying the tube and having the proper license to use it.

Finishing Touches:   Add copyright and save as a psp.  Add name(s) crop and resize as needed, save as a png and you are done.

Thank you for taking a look at my tut.  And as always any compliments are greatly appreciated.

Beach Party

Beach Party

©Barbara Butler

July2013

Scrap Kit:Strawberry Beach BY Rissas Designs Here

Elements and Papers Used:

Surfboard and Ball

Milkshake

Net

Beach Chair

Umbrella

Lifesafer

Lighthouse

Beach Sign

Sand

Wave

Open a blank canvas 800X600

Surfboard and Ball:  C&P on to canvas. Resize by 75% and place to the left.

Milkshake:  C&P on to canvas. Resize by 50%.  Place to the right.

Net:  C&P on to canvas.  Resize by 75% place behind the surfboard.  Duplicate merge duplicate down to original.  Duplicate again mirror merge this layer down.  Duplicate one more time.  With the right arrow key move it to the right so the ends meet up.  Merge this layer down.  Repeat the last step.

LightHouse:  C&P on to canvas.  Place on the right side of the net layer.

Lifesafer:  C&P on to canvas.  Resize by 75% twice.  Place behind the Surfboard.

Beachsign:  C&P on to canvas. Place just in front of the net.

ColorPalette: Now I know this isnt an element but I used it anyway.  C&P on to canvas.  Apply an inner bevel of choice (make it look like a beach towel).  Place it on the right side.

Beach Chair:  C&P on to canvas.  Resize by 50% and place in front of the color palette.

BeachBag:  C&P on to canvas.  Resize by 50% then by 75% and place in front of the chair.

Umberella:  C&P on to canvas.  Resize by 75%.  Place behind the other three.

Sand:  C&P on to canvas twice.  Move one over a little bit. Merge the two.  Place behind the other elements.

Wave:  C&P on to canvas.  Place behind others, and to the left.

Tube:  C&P tube of choice.  I'm BeachBall by Pinuptoons which you can fine at CDO.  Please do not use without buying the tube and having the proper license.  Add copyright and save as a psp.

Name:  Add name crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you enjoyed.  Any compliments is appreciated.

Soft Kitty

Soft Kitty:

©Barbara Butler

July 12, 2013

Scrap Kit Used:  Soft by Rissa Designs can be found Here

Mask:  WSL084

Tube:  Floral by Anna Liwanag.  I got this tube back when pte was opened but I do believe you can fine it at CDO now.  Please do not use without buying it and having the proper license for it.

Lets Begin

New canvas 800X600

Paper4:  Copy and paste it over onto the working canvas.

Lights2:  Copy and paste it over onto the working canvas.  Resize 75% and place to the right.

Sign:  Copy and paste onto to working canvas and resize 75%.  Place in front of the light and move it up just a little.  With your eraser tool erase just the top left part of the sign so it looks like part of the Lights.

Flowers:  Copy and paste onto canvas and resize by 65%.  Mirror and place on the left.

Clock:  Copy and paste.  In the layer palette move it down to just above the mask layer.  Change the blend mode to overlay.

Buttefly Scatter:  Copy and paste onto the canvas.  Resize by 65% and move to the bottom and above the other elements.

Cat1:  Copy and Paste onto canvas.  Resize by 65% and place in front of the SIgn.

Bird1:  Copy and Paste onto canvas.  Resize by 65% twice.  Place in front of the flowers.

Bike:  Copy and Paste onto canvas.  Resize by 65% and place behind the cat.

Tube:  Copy and paste tube of choice.  Resize as needed.  Add copyright and save as a psp image.

Add name(s) resize as needed and save as a png and you are done.  

Thank you for taking a look at my tut.

Country Luvin Extras

Extras Using Rissa Designs Country Kitchen Kit.  You can fine the kit Here.

Cupcake Delight

Cupcake Delight
©Barbara Butler
May 2, 2013

This tut was written for people with working knowledge of PSP.  Program used is PSP X5 but any should work just fine.  This was written from my own imagination and any resemblance is purely coincidental.
Materials Needed:
Scrap kit:  Frosted Cupcake Rissa Designs you can fine it Here
Template 13_2013 by Me you can fine it Here

Elements & Papers Used:
Paper1
Paper4
Paper6
Paper7
Paper10
Cupcakes
Drapery

Bow2
Cupcake3

Cupcake2
Cotton Candy
Cat

Candy Stick




Let's Begin:
Remember to save often.



Open template duplicate and close original.  Delete the copyright layer.

Paper Instructions:
On Raster2 select all>float>defloat paste Paper4 into selection.

On Raster7 select all>float>defloat and paste Paper7 into selection.

On Raster5 select all>float>defloat and paste Paper1 into selection.

On Raster3 select all>float>defloat and paste Paper6 into selection.

On Raster4 select all>float>defloat and paste Paper10 into selection.  Mirror the layer.


Element Instructions:
All Elements are resized by 75% unless other wised stated.  See my tag for placement.

Paste Cupcakes onto canvas resize once.  And if you're not already bring them to the top.

Paste Drapery place to the right and in front of Raster4.  Add a DS of choice or use my settings.  6, 4, 93, 9 #49352e  With the deform tool size as needed.

Paste Bow2 and resize.  Place to the left.  Add the same DS as before.

Paste Cupcake3 resize twice. Paste Cupcake2 resize 3 times.   Place each cupcake on drapery tops. 

Paste CottonCandy resize.  place to the right of the drapery.  Free rotate 15 degrees to the right.

Paste Cat resize twice, mirror, and move in front of the cotton candy.

Paste Candy Stick and place in front of the Drapery just in front of the long end.  Duplicate and place this one in front of the shorter end of the Drapery using the erase tool erase some of the bottom.

Add a tube of choice.  I'm using the artwork of Eugene Rzhevskii this tube was a gift for April Loyal customers over at pics for design.  Resize as needed.  Add copyright and save as a psp.

Add name(s) and any kind of embellishments to it.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you like it.

Whispers Of Spring

Whispers of Spring:
©Barbara Butler
March 21, 2013

Materials:
Scrap Kit:  SpringWhisper by Rissa's Design which you can fine Here
Mask: Mask 41 (I'm not sure where I got this mask from.  I want to say it came from The Misfits Blog, but I'm not sure.  If you know where it comes from let me know and I'll add it to the list of materials).
PSP x4 was used but any version will do just fine.

This tutorial was written from my own imagination, and any similarities is pure coincidental.

Elements and Papers Used:
Wine Barrel
Tulips
Turtle
Sun
HummingBird
Garden Sign
Mushroom
Flower1
Flower2
Fence
Paper1

Lets Begin.
Open new canvas 800X600.  (Remember to save often).

Paper Instructions:

01.  Paste Paper1 onto canvas and apply the mask.  Add an inner bevel of choice or use  my settings.  #2, 15, 6, 13, -1, 9, 315, 50, 50 White.


Element Instructions:
All Elements are resized by 75% unless other wised stated.

01.  Paste Wine Barrel on to the canvas and resize 3 times and place on the bottom left.

02.  Paste Garden Sign on to the canvas and resize once and place just behind the Wine Barrel.

03.  Paste the Turtle on to the canvas and resize 3 times.  Place in front of the Wine Barrel just to the right a little bit.

04.  Paste the Tulips on to the canvas and resize 3 times.  Place just to the left of the Turtle.

05.  Paste the Hummingbird on to the canvas and resize 3 times.  Place on the top right and free rotate 30 degrees to the right.

06.  Paste the Mushroom on to the canvas and resize 4 times.  Place on the bottom right side.

07.  Paste Flower1 on to the canvas and resize twice.  Place behind the Mushroom.

08.  Paste the Fence on to the canvas and resize twice.  Move to the bottom and behind all the elements.  Just above the paper layer.

09.  Paste Flower2 on to the canvas and resize 3 times.  In the layer palette move it just under neath the Mushroom and move it to the left of it.

10.  Paste the Sun on to the canvas and resize twice.  Place behind the Garden Sign.

11.  Add tube of choice I'm using the artwork of Misticheskaya you can get this tube at PFD (please don't use without buying it and having a license to use it).  Resize as needed.  For this tube i had to resize twice.  And place to the left and behind the Wine Barrel.

12.  Add copyright and save as a psp or psd.

13.  Add name resize as needed and save as a png.

Thank you for taking a look at my tutorial.