Sarah PTU CT

Sarah:
©Barbara Butler
June 20, 2013


-Scrap Kit:  Sarah By Amy Marie can be found here-

800X600
Remember to save often.



Element101 Copy and paste on to canvas.  with magic wand click on the inside of  the frame.  expand by 6 paste Paper8 onto the canvas invert and hit delete.

Element72 Copy and paste on to canvas.  Resize by 50% then by 75% and place in the bottom  left of the frame.

Element5:  Copy and Paste on to canvas.  Resize by 75% twice, free rotate 15 degrees to the left and place on the right hand side of the frame.

Element30:  Copy and Paste on to canvas.  Resize by 85% and with your deform tool stretch it back out just a little bit and rotate it until it is tilted the same way as the frame. 

Element5:  Copy and Paste on to canvas.  Resize by 75% place on the bottom of the frame.  Free rotate 15 degrees to the left and with the deform tool rotate it back to the right a little bit.

Element102:  Copy and Paste on to canvas.  Resize by 75% twice.  Place on the right on top of Element5.

PP2:  Copy and paste on to canvas.  Send to the bottom.  Apply a mask of choice (I'm using WSL84 which is my favorite mask to use).

Element45:  Copy and Paste on to canvas.  Resize by 75% place on top of the mask layer in the layer palette.  Place on the left hand side.  Duplicate and move the duplicate to the right.

Tube:  Copy and paste a tube of choice.  I'm using the artwork of Keith Garvey please dont use without the proper license to use it and buying it.  Resize as needed and place where you think it would look good on your tag. 

Finishing touches:  Add copy right and save as a psp.  Add name(s) resize as needed and save as a png and you are done.

Thank you for taking a look at my tut.  Hope you enjoyed it.

Cascade

Cascade:

©Barbara Butler

June 13, 2013

Materials:

Scrap Kit: Cascade By Amy Marie can be found here.

 Mask WSL84 (you can use any mask).

This Tutorial was written from my own imagination and any resemblance is purely coincidental.  It was written for those with working knowledge of PSP.

Let's Begin: 

 Open up a new canvas 800X600 (this is the size I usually work with).

Open PP016 and copy it.  Close the original.  Go to the working canvas and paste the paper.  And apply the mask.

Open up Element 111.  Copy and close the original.  Paste it back onto your working canvas.  Resize 75%, and place to the right.

Open up Element 109 copy and close the original.  Back on your working canvas paste it and resize by 75%.  Place to the right of Element111.

Open up Element106 copy and close the original.  Back on your working canvas paste it and resize by 75% twice and place next to Element 109.

Open up Element97 copy and close the original.  Back on your working canvas and paste it.  Place behind the other three.

Open up Element91 copy then close the original.  Paste it on your working canvas and place behind Element97.

Open up Element49 copy and then close the original.  Paste it on your working canvas and resize 75% twice.   Place just above Element97 on the right.

Open up Element19 copy then close the original.  Paste it on your working canvas.  Place behind Element49.

Open up your tube and copy it and then close the original.  Paste it on your working canvas and resize as needed.

Put any copyrights that are needed and save as a psp.

Add any name(s) resize if needed and save as a png.  And you are done.

Thank you for taking a look at my tut.  Hope you enjoyed it.

 

Sailor Girl

Sailor Girl
©Barbara Butler
June 9, 2013


Materials Needed:
Scrap Kit:  Sailor Girl By Amy Marie can be found Here
Tube of choice I'm using the amazing artwork Ismael Rac.  Please do not use without the proper license for it.  You can fine the tube Here

Elements & Papers Used:
14, 12, 21, 28, 24, 42, 73 PP010


Let's Begin.
All elements will be resized by 75% unless other wised stated.  Remember to save often.

Copy and paste Element14 and resize once.

Copy and Paste Element12.  Place to the right of Element14.  Duplicate and merge down.  Duplicate again and mirror it.  Resize one more time.

Copy and Paste Element21 on to the canvas.  Place on the right side.  Duplicate mirror and place on the left side.

Copy and paste Element28 and resize three times.  Place in the middle of Element21.  Duplicate and mirror.

Copy and Paste Element24 and resize once.  Place on the left side and in the layer palette place behind the other elements.

Copy and paste Element42 resize three times and bring it to the top.  Place between the two starfish.

Copy and paste Element73 resize once.  Place on top.

Back on the first layer with the magic wand click on the inside of the frame expand by 6. Add a new layer and copy and paste PP010 into selection.  In the layer palette move it down.

Keep selected add another new layer and paste your tube of choice into selection.

Add copyright and save as a psp.  Then add any names crop and resize as needed and save as png and you are done.

Thank you for taking a look at my tut.

Mermaid Lagoon

Mermaid Lagoon
©Barbara Butler
June 2, 2013

Materials Needed:
ScrapKit Provided by Quizzy Designs Can be found @ Mystical Scraps
Poser By English Rose Both can be found @ Mystical Scraps
PSP I use PSP X5 but any version will do.
This tut was written for people with working knowledge of PSP.  It was written from my own imagination and any resememblence to any others is purely coincidental.



Paper Instructions:

On Layer 4 Select all float defloat C&P PP6 into selection.
On Layer 1 Select all float defloat C&P PP1 into selection.
On Layer 8 Select all float defloat C&P PP4 into selection.
Go back to the PP4 and mirror Copy.  Back to the template go to Layer 7 select all float defloat and Paste PP4 into selection.
On Layer 2 Select all float defloat C&P PP2 onto the canvas.  Invert and hit delete.  Repeat this step for Layer 3.
On Layer 5 Select all float defloat and C&P Paper1 into selection.  Repeat for Layer 6.


Element Instructions:
All Elements resized by 75% unless other wised stated.  See my tag for placement of elements, or place where you want.

C&P Ele 53 onto canvas and resize 6 times.  Duplicate two times merge the two together.  Place behind Layer 8 and to the right.  Duplicate again mirror and move just behind Layer 7. 

C&P Ele49 onto canvas and Resize 5 times.  Place in front of Layer 8 and to the top right hand corner of it.

C&P Ele46 onto the canvas.  Place just above PP6 in the layer palette.

C&P Ele45 onto canvas and resize 5 times.  Place on the bottom right.

C&P Ele43 onto to canvas and resize 6 times.  Place behind the swan.  Duplicate and mirror move to the right a little.

C&P Ele32 onto canvas and resize 5 times.  Place to the bottom left.

C&P Ele27 onto canvas and resize 4 times.  Place behind the flower.

C&P Ele5 onto canvas and resize 4 times.  Place just behind the swan and in between the cattails.

C&P Ele40 onto canvas and resize 3 times and place behind the other elements on the bottom.

Paste a tube of choice.  I'm using a poser by English Rose Designs.  If you use a tube please make sure you have license to use it.

Add any copyrights that are needed.  Save as psp. 

Add name(s) and save as a png.  Resize as needed.  And you are done.

Thank you for taking a look at my tut.

Country Luvin Extras

Extras Using Rissa Designs Country Kitchen Kit.  You can fine the kit Here.

Cupcake Delight

Cupcake Delight
©Barbara Butler
May 2, 2013

This tut was written for people with working knowledge of PSP.  Program used is PSP X5 but any should work just fine.  This was written from my own imagination and any resemblance is purely coincidental.
Materials Needed:
Scrap kit:  Frosted Cupcake Rissa Designs you can fine it Here
Template 13_2013 by Me you can fine it Here

Elements & Papers Used:
Paper1
Paper4
Paper6
Paper7
Paper10
Cupcakes
Drapery

Bow2
Cupcake3

Cupcake2
Cotton Candy
Cat

Candy Stick




Let's Begin:
Remember to save often.



Open template duplicate and close original.  Delete the copyright layer.

Paper Instructions:
On Raster2 select all>float>defloat paste Paper4 into selection.

On Raster7 select all>float>defloat and paste Paper7 into selection.

On Raster5 select all>float>defloat and paste Paper1 into selection.

On Raster3 select all>float>defloat and paste Paper6 into selection.

On Raster4 select all>float>defloat and paste Paper10 into selection.  Mirror the layer.


Element Instructions:
All Elements are resized by 75% unless other wised stated.  See my tag for placement.

Paste Cupcakes onto canvas resize once.  And if you're not already bring them to the top.

Paste Drapery place to the right and in front of Raster4.  Add a DS of choice or use my settings.  6, 4, 93, 9 #49352e  With the deform tool size as needed.

Paste Bow2 and resize.  Place to the left.  Add the same DS as before.

Paste Cupcake3 resize twice. Paste Cupcake2 resize 3 times.   Place each cupcake on drapery tops. 

Paste CottonCandy resize.  place to the right of the drapery.  Free rotate 15 degrees to the right.

Paste Cat resize twice, mirror, and move in front of the cotton candy.

Paste Candy Stick and place in front of the Drapery just in front of the long end.  Duplicate and place this one in front of the shorter end of the Drapery using the erase tool erase some of the bottom.

Add a tube of choice.  I'm using the artwork of Eugene Rzhevskii this tube was a gift for April Loyal customers over at pics for design.  Resize as needed.  Add copyright and save as a psp.

Add name(s) and any kind of embellishments to it.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you like it.

§What a Girl Wants§

 What A Girl Wants
©Barbara Butler
April 13, 2013

This tutorial was written from my own imagination.  And any resememblence to any other is purely coincidental.  The tag was made in PSPX5 but any version will do.  And any painting program will work just fine.

Materials Needed:
Scrap Kit:  What A Girl Wants By Hania's Design you can fine the kit at Mystical Scraps Here
Eye Candy 4000 Gradient Glow
Font of choice I used Sick City Capital you can fine it at Dafont.com

Settings:
Drop Shadow:
For CU Tube: 4, 6, 100, 0, color of choice I used #6f0342.

Supplies:
Papers:
Papers 03

Elements:
04, 06, 09, 19, 24, 27, 49, 64, 75, 77

Lets Begin

New Canvas 800X600

Elements:
All elements are resized by 75% unless otherwised stated.  See my tag for placement.

01.  Paste Element 77 on to the canvas.  Resize.  With magic wand click on the inside of the frame and paste Paper 03 on to the canvas invert and hit delete on your keyboard.

02.  Paste Element 75 and resize twice.  Free rotate 30 degrees to the left.  Duplicate mirror the copy and move to the left.

03.  Paste Element 27 and resize.  Duplicate and mirror.  Duplicate the original one more time resize and free rotate 30 degrees to the left.  And now on the first copy layer duplicate and resize and free rotate 30 degrees to the right.

04.  Paste Element 24.  Move to the bottom of the frame.  And place in front of the bigger flowers.

05.  Paste Element 06 and re size four times.  Bring to the top (unless you're already there) and place in front of the smaller flowers.

06.  Paste Element 04 and re size three times.  And place to the left of Element 24.

07.  Paste Element 09 re size twice.  And place to the right of Element 24.

08.  Paste Element 49 and re size three times.  Place to the right and behind the flower in the layer palette.

09.  Paste Element 64 re size twice.  Place on top of the frame left side.

Tube:

Tube of choice.  I'm using the amazing artwork of Keith Garvey.  This is his LE for April 2013.  Any tube will do.  Please do not use with out a proper license.

01.  On the paper layer select all, float, de float, and a new raster layer and paste CU of tube (if yours comes with one), into selection.  Deselect.  Add a gradient glow of choice.  My settings for this are glow width of 3 (the rest on the basic tab remains the same).  For the color I just picked a color out of the tube.  You can move the arrows to where ever you would like.  Add a drop shadow of choice or use my settings.

02.  Paste your main tube resize to desire size.  And place just in front of Element 24.  You might need to move Element 04 behind the tube but that will all depend on the size of your tube.


Finishing Touches:

Add your copyright and name (do not convert the name to a raster yet).  Save as a psp.  Now convert to raster.  With crop tool crop the canvas down to size.  Now if its still to big (most forums dont like having tags bigger then 600) you might want to re size your tag).  Save as a png and you are done.  You can add any embellishments to the name that you want.  I like adding eye candy, inner bevel, and drop shadow to mine.

Thank you for taking a look at my tut.