Sarah PTU CT

Sarah:
©Barbara Butler
June 20, 2013


-Scrap Kit:  Sarah By Amy Marie can be found here-

800X600
Remember to save often.



Element101 Copy and paste on to canvas.  with magic wand click on the inside of  the frame.  expand by 6 paste Paper8 onto the canvas invert and hit delete.

Element72 Copy and paste on to canvas.  Resize by 50% then by 75% and place in the bottom  left of the frame.

Element5:  Copy and Paste on to canvas.  Resize by 75% twice, free rotate 15 degrees to the left and place on the right hand side of the frame.

Element30:  Copy and Paste on to canvas.  Resize by 85% and with your deform tool stretch it back out just a little bit and rotate it until it is tilted the same way as the frame. 

Element5:  Copy and Paste on to canvas.  Resize by 75% place on the bottom of the frame.  Free rotate 15 degrees to the left and with the deform tool rotate it back to the right a little bit.

Element102:  Copy and Paste on to canvas.  Resize by 75% twice.  Place on the right on top of Element5.

PP2:  Copy and paste on to canvas.  Send to the bottom.  Apply a mask of choice (I'm using WSL84 which is my favorite mask to use).

Element45:  Copy and Paste on to canvas.  Resize by 75% place on top of the mask layer in the layer palette.  Place on the left hand side.  Duplicate and move the duplicate to the right.

Tube:  Copy and paste a tube of choice.  I'm using the artwork of Keith Garvey please dont use without the proper license to use it and buying it.  Resize as needed and place where you think it would look good on your tag. 

Finishing touches:  Add copy right and save as a psp.  Add name(s) resize as needed and save as a png and you are done.

Thank you for taking a look at my tut.  Hope you enjoyed it.

Cascade

Cascade:

©Barbara Butler

June 13, 2013

Materials:

Scrap Kit: Cascade By Amy Marie can be found here.

 Mask WSL84 (you can use any mask).

This Tutorial was written from my own imagination and any resemblance is purely coincidental.  It was written for those with working knowledge of PSP.

Let's Begin: 

 Open up a new canvas 800X600 (this is the size I usually work with).

Open PP016 and copy it.  Close the original.  Go to the working canvas and paste the paper.  And apply the mask.

Open up Element 111.  Copy and close the original.  Paste it back onto your working canvas.  Resize 75%, and place to the right.

Open up Element 109 copy and close the original.  Back on your working canvas paste it and resize by 75%.  Place to the right of Element111.

Open up Element106 copy and close the original.  Back on your working canvas paste it and resize by 75% twice and place next to Element 109.

Open up Element97 copy and close the original.  Back on your working canvas and paste it.  Place behind the other three.

Open up Element91 copy then close the original.  Paste it on your working canvas and place behind Element97.

Open up Element49 copy and then close the original.  Paste it on your working canvas and resize 75% twice.   Place just above Element97 on the right.

Open up Element19 copy then close the original.  Paste it on your working canvas.  Place behind Element49.

Open up your tube and copy it and then close the original.  Paste it on your working canvas and resize as needed.

Put any copyrights that are needed and save as a psp.

Add any name(s) resize if needed and save as a png.  And you are done.

Thank you for taking a look at my tut.  Hope you enjoyed it.

 

Sailor Girl

Sailor Girl
©Barbara Butler
June 9, 2013


Materials Needed:
Scrap Kit:  Sailor Girl By Amy Marie can be found Here
Tube of choice I'm using the amazing artwork Ismael Rac.  Please do not use without the proper license for it.  You can fine the tube Here

Elements & Papers Used:
14, 12, 21, 28, 24, 42, 73 PP010


Let's Begin.
All elements will be resized by 75% unless other wised stated.  Remember to save often.

Copy and paste Element14 and resize once.

Copy and Paste Element12.  Place to the right of Element14.  Duplicate and merge down.  Duplicate again and mirror it.  Resize one more time.

Copy and Paste Element21 on to the canvas.  Place on the right side.  Duplicate mirror and place on the left side.

Copy and paste Element28 and resize three times.  Place in the middle of Element21.  Duplicate and mirror.

Copy and Paste Element24 and resize once.  Place on the left side and in the layer palette place behind the other elements.

Copy and paste Element42 resize three times and bring it to the top.  Place between the two starfish.

Copy and paste Element73 resize once.  Place on top.

Back on the first layer with the magic wand click on the inside of the frame expand by 6. Add a new layer and copy and paste PP010 into selection.  In the layer palette move it down.

Keep selected add another new layer and paste your tube of choice into selection.

Add copyright and save as a psp.  Then add any names crop and resize as needed and save as png and you are done.

Thank you for taking a look at my tut.

Mermaid Lagoon

Mermaid Lagoon
©Barbara Butler
June 2, 2013

Materials Needed:
ScrapKit Provided by Quizzy Designs Can be found @ Mystical Scraps
Poser By English Rose Both can be found @ Mystical Scraps
PSP I use PSP X5 but any version will do.
This tut was written for people with working knowledge of PSP.  It was written from my own imagination and any resememblence to any others is purely coincidental.



Paper Instructions:

On Layer 4 Select all float defloat C&P PP6 into selection.
On Layer 1 Select all float defloat C&P PP1 into selection.
On Layer 8 Select all float defloat C&P PP4 into selection.
Go back to the PP4 and mirror Copy.  Back to the template go to Layer 7 select all float defloat and Paste PP4 into selection.
On Layer 2 Select all float defloat C&P PP2 onto the canvas.  Invert and hit delete.  Repeat this step for Layer 3.
On Layer 5 Select all float defloat and C&P Paper1 into selection.  Repeat for Layer 6.


Element Instructions:
All Elements resized by 75% unless other wised stated.  See my tag for placement of elements, or place where you want.

C&P Ele 53 onto canvas and resize 6 times.  Duplicate two times merge the two together.  Place behind Layer 8 and to the right.  Duplicate again mirror and move just behind Layer 7. 

C&P Ele49 onto canvas and Resize 5 times.  Place in front of Layer 8 and to the top right hand corner of it.

C&P Ele46 onto the canvas.  Place just above PP6 in the layer palette.

C&P Ele45 onto canvas and resize 5 times.  Place on the bottom right.

C&P Ele43 onto to canvas and resize 6 times.  Place behind the swan.  Duplicate and mirror move to the right a little.

C&P Ele32 onto canvas and resize 5 times.  Place to the bottom left.

C&P Ele27 onto canvas and resize 4 times.  Place behind the flower.

C&P Ele5 onto canvas and resize 4 times.  Place just behind the swan and in between the cattails.

C&P Ele40 onto canvas and resize 3 times and place behind the other elements on the bottom.

Paste a tube of choice.  I'm using a poser by English Rose Designs.  If you use a tube please make sure you have license to use it.

Add any copyrights that are needed.  Save as psp. 

Add name(s) and save as a png.  Resize as needed.  And you are done.

Thank you for taking a look at my tut.