A Minty Christmas

A Minty Christmas
©Barbara Butler
October 2013

Christmas Tut 6 using the beautiful kit Winter Mint by Amy Marie.  This kit can be found at www.amymarieskits.com.

Template-Naught or Nice By Victoriaz Creationz.  Can be found at www.victoriazcreationz.blogspot.com.

01.  Open up template.  Check to make sure it is at 72DPI.  Duplicate the template and close the original.  Delete the copyright and word art layers.

02.  Small Square-Select all, float, defloat.  Paste Pp012 into the selection.  Select none.

03.  Circle-Select all, float, defloat.  Paste Pp019 into the selection.  Select none.

04.  Rectangle-Select all, float, defloat.  Paste Pp018 into the selection.  Select none.

05.  Big Square-Select all, float, defloat.  Paste Pp4 into the selection.  Select none.

06.  Circle 1-Select all, float, defloat.  Paste Pp3 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

07.  Circle 2-Select all, float, defloat.  Paste Pp010 into the selection.  Select none.

08.  Snowflake-Select all, float, defloat.  Paste Pp5 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

09.  Paste A Winter Girl on to the canvas.  Re size by 65% three times.  Place on the bottom left.

10.  Paste Be1 on to the canvas.  Place on the left and behind the circle layers.

11.  Paste Berries on to the canvas.  Place on the top left and send it to the bottom.

12.  Paste Branch 1 on to the canvas.  Move it to the top in the layer palette and place it on the bottom of the canvas.

13.  Paste Cat 1 on to the canvas.  Re size by 65% once.  Place on the bottom right.

14.  Paste Candy Cane 1 on to the canvas.  Re size by 65% twice. Place on the top left.

15.  Paste Snow Tree on to the canvas.  Re size by 75% once.  Place behind the cat.

16.  Go to the square layer-select all,float, deflaot.  Paste Snowoverlays on to the canvas, invert the selection and hit the delete key.  Select none.

17.  Paste Snowflake2 on to the canvas.  Re size by 50% once and place on the top right.

18.  Paste Candle 1 on to the canvas.  Re size by 75% once.  Place behind the branch at the bottom.

19.  Paste tube of choice on to the canvas.  Re size as needed.  Place to your liking.  Paste a close up of the tube in the small square.  Add copyright.

20.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Blue Blue Christmas

Blue Blue Christmas
©Barbara Butler
October 2013

Here is Christmas Tut 5.  I'm using the Kit Blue Blue Christmas by Amy Marie.  The kit can be found at www.amymarieskits.com.

Template:  let it snow template by victoriazcreationz.  this can be found at http://victoriazcreationz.blogspot.com.  I've had this one for awhile so I'm not sure if its still there or not.

01.  Open up the template.  Make sure its at 72dpi.  Duplicate it and close the original template.  Re size the canvas so the elements will fit.  Delete the copyright layer and the word art layer.

02.  Raster 4-Select all, float, defloat.  Paste Pp11 into the selection.  Select none.

03.  Raster 2-Select all, float, defloat.  Paste Pp7 into the selection.  Select none.

04.  Raster 3-Select all, float, defloat.  Paste Pp4 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

05.  Merged-Select all, float, defloat.  Paste Pp1 as a new layer.  Invert the selection and hit the delete key.  Select none.  Change the blend mode to Multiply.  Do not close or delete the original layer.

06.  Paste Element 1 on to the canvas.  Re size by 67% twice.  Place on the left side.

07.  Paste Element 13 on to the canvas.  Re size by 67% twice.  Place on the top right.  Rotate 15 degrees to the left.  Paste Element 14 on to the canvas.  Re size by 67% twice and place beside the first one and below it in the layer palette.

08.  Paste Element 21 on to the canvas.  Re size by 67% three times.  Mirror it and place it on the bottom right.

09.  Paste Element 32 on to the canvas.  Re size by 67% twice.  Place on the right side of the tree.

10.  Paste Element 47 on to the canvas.  Re size by 67% once.  Place on the top.

11.  Paste Element 48 on to the canvas.  Re size by 67% once.  Mirror it and place it behind the ornament on the bottom right.

12.  Paste Element 84 on to the canvas.  You can go ahead and leave this right where it is.

13.  Paste Element 83 on to the canvas.  Place it behind all of the elements on the right side.

14.  Paste Element 58 on to the canvas.  Re size by 67% once.  Place on the bottom.

15.  Paste tube of choice on to the canvas.  Re size as needed.  Add the copyright.

16.  Add name and save as a pspimage.  Add any effects you would like.   Crop and re size as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Have a Punky Punky Christmas

Have a Punky Punky Christmas
©Barbara Butler
October 30, 2013

Here is Christmas Tut 4.  I'm using the Kit My Punky Christmas by Amy Marie.  The kit can be found at www.amymarieskits.com.


01.  New image 800X600 72dpi

02.  Paste the Train on to the canvas.  Place on the bottom right.

03.  Paste the Train on to the canvas.  Resize by 75% three times.  Place behind the train.

04.  Paste Santa Punk on to the canvas.  Resize by 75% twice.  Place on the left side of the tree.

05.  Paste Packages on to the canvas.  Resize by 75% twice.  Place on the right side of the tree.

06.  Paste Element 12 on to the canvas.   Place on the left side and behind the tree.

07.  Paste Cat on Ball on to the canvas.  Resize by 75% twice.  Place behind the train.

08.  Paste Giftbox on to the canvas.  Resize by 75% twice.  Place beside Santa Punk.

09.  Paste the Light on to the canvas.  Resize by 85% twice.  Place on the left side right behind the Giftbox.

10.  Paste tube of choice on to the canvas.  Resize as needed.  Place to your liking.

11.  Add name and save as a pspimage.  Crop and resize as needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.

A Very Beary Christmas

A Very Beary Christmas
©Barbara Butler
October 2013

Here comes Christmas Tut 3.  This time I'm using the cute kit Beary Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com.

Note:  All Elements will be resized by 75% unless otherwised stated.

01.  New Image 800X600 72DPI.

02.  Paste Element 29.  Resize once.  With the magic wand click on the inside.  Paste Pp5 as a new layer.  Invert the selection and hit the delete key.  Select none.

03.  Paste Element 103 on to the canvas.  Resize twice and place in the top right corner of the frame.

04.  Paste Element 12 on to the canvas.  Resize twice.  Place in the bottom right corner.

05.  Paste Element 20 on to the canvas.  Resize once.  Place on the left side and send it to the bottom of the layer palette.

06.  Paste Elements 105 and 108 on to the canvas.  Merge them together.  Resize three times and place behind Element 12.

07.  Paste Element 13 on to the canvas.  Resize by 50% once.  Place in the bottom left corner.

08.  Paste Element 76 on to the canvas.  Resize twice.  Place on the right side and behind the presents.

09.  Paste Element 94 on to the canvas.  Resize once.  Place on the left side. 

10.  Paste Tube of choice on to the canvas.  Resize it as needed.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects.  Crop and resize as needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.

Chocolate Cane

Chocolate Cane
©Barbara Butler
October 2013

Materials
Template-MerryChristmasTemp.  It can be found http://victoriazcreationz.blogspot.com.  I've had this template for awhile so if this link is no longer available I'm sorry.

Here comes Christmas Tut 2.  This time I'm using the beautiful kit Chocolate Cane by Amy Marie.  This kit can be found at www.amymarieskits.com.

01.  Open up the template.  Check to make sure it is at 72dpi.  Duplicate and close the original template.  Delete the copyright layer.  Resize the canvas a little bit, this way the elements will fit.  Delete the wordart layers.

02.  Square-Select all, float, defloat.  Paste Pp012 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

03.  Lines-Select all, float, defloat.  Paste Pp09 into the selection.  Select none.

04.  Paste Ball 3 on to the canvas.  Resize by 75% twice.  Place on the top right.

05.  Paste Tree 2 on to the canvas.  Resize by 75% once.  Place on the left side.

06.  Paste Train on to the canvas.  Resize by 75% once.  Mirror it and place it in front of the tree.

07.  Paste Limb 3 on to the canvas.  Resize by 75% once.  Place behind the tree.

08.  Paste Cupcake 1 on to the canvas.  Resize by 75% three times.  Place on the right.

09.  Paste Cupcake 2 on to the canvas.  Resize by 65% once.  Place to the right and behind the first one.

10.  Paste Drink on to the canvas.  Resize by 65% once.  Place behind the cupcakes.

11.  Paste Cat Boot on to the canvas.  Resize by 65% once.  Place on the left and in front of the train.

12.  Paste Element 3 on to the canvas.  Place on the left side.  Send it to the bottom.  Duplicate it.  Mirror the duplicate and place this one over on the right side.

13.  Paste Kitty Hat on to the canvas.  Resize by 65% once.  Place on the right side.

14.  Paste tube of choice on the canvas.  Resize as needed.  Place to your liking.

15.  Add name and save as a pspimage.  Add any effects you want.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

A Victorian Christmas

A Victorian Christmas
©Barbara Butler
October 2013

Materials
Template-Temp77 by tamie williams.  This can be found at www.addictivetemplates.com

The holiday season is approaching quickly.  I'm not ready for the shopping and craziness of that it brings but I'm excited for all the beautiful kits that come out this time of year.  So without further ado here is my first of many tuts for the season.   It is using the beautiful kit Victorian Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com.

01.  Open up template.  Check to make sure its at 72dpi.  Duplicate and close the original template.  Delete the copyright layer.  Resize the canvas to a size of your choosing, I used 949X949.  This is to insure that the elements will fit nicely on the tag. 

02.  Raster 8-Select all, float, defloat.  Paste Pp17 into the selection.  Select none.

03.  Raster 7-Select all, float, defloat.  Paste Pp9 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

04.  Raster 5-Select all, float, defloat.  Paste Pp2 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

05.  Copy of Raster 5-Repeat the last step.

06.  Raster 4-Select all, float, defloat.  Paste Pp7 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

07.  Raster 3-Select all, float, defloat.  Paste Pp1 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

08.  Copy of Raster 3-Repeat the last step.

09.  Raster 6-Select all, float, defloat.  Paste Pp8 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

10.  Copy of Raster 6-Repeat last step.

11.  Raster 2-Select all, float, defloat.  Paste Pp14 into the selection.  Select none.

12.  Copy of Raster 2-Repeat the last step.

13.  Paste Element 3 on to the canvas.  Resize by 75% twice.  Place on the left side.

14.  Paste Element 6 on to the canvas.  Resize by 75% once.  Place on the right side.

15.  Paste Element 7 on to the canvas.  Resize by 75% twice.  Mirror it and place it on the bottom left.

16.  Paste Element 11 on to the canvas.  Resize by 75% twice.  Place it on the right side of the candles.

17.  Paste Element 18 on to the canvas.  Resize by 75% twice.  Place on the left side of the stocking.

18.  Paste Element 32 on to the canvas.  Resize by 50% once.  Place on the right side.

19.  Paste Element 93 on to the canvas.  Resize once by 50% then again by 75%.  Place beside the other one.

20.  Paste Element 95 on to the canvas.  Resize by 50% once.  Place between the two presents.

21.  Paste Element 97 on to the canvas.  Resize by 50% once.  Place on the left side and behind the candles.

22.  Paste Element 90 on to the canvas.  Mirror it and place it behind the tree to where the tail peaks out on the right.

23.  Paste Element 35 on to the canvas.  Resize it by 50% once.  Place in front of the candles.

24.  Paste Element 1 on to the canvas.  Resize by 75% once.  Place behind the elements on the left side.

25.  Paste tube of choice on to the canvas.  Resize as needed.  Add copyright.

26.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.

Ice Fairy

Ice Fairy
©Barbara Butler
October 2013

Materials
Kit-Ice Fairy by Amy Marie.  You can fine this icy gem at www.amymarieskits.com
Template-Template167 by Missy.  You can fine this at http://divineintentionz.blogspot.com

01.  Open up template.  Make sure its at 72dpi.  Duplicate and close the original.  Delete the copyright layer.  You might want to resize the canvas to fit the elements on it properly.  I resize my canvas by 200 on each side from what it says but this is completely up to you.  If you don't resize it the resizing of elements might be different.  I resized mine to 682X673.

02.  Background Frame-Select all, float, defloat.  Paste Pp6 into the selection.  Select none.

03.  Frame-Select all, float, defloat.  Paste Pp10 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

04.  Ric Rac 1&2-Select all, float, defloat.  Paste Pp11 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.  Merge the two together.  Add a gradient glow of choice.

05.  Heart-Select all, float, defloat.  Add a new layer and paste Pp13 into the selection.  Select none.  Delete or close the original layer.

06.  Paste Element 102 on to the canvas.  Resize by 75% twice.  Place on the top right.

07.  Paste Element 93 on to the canvas.  Resize by 75% twice.  Mirror it and place it on the bottom left.

08.  Paste Element 92 on to the canvas.  Resize by 75% once.  Place on the bottom right.

09.  Paste Element 82 on to the canvas.  Resize by 75% three times.  Place behind Element 92 on the right.

10.  Paste Element 74 on to the canvas.  Resize by 75% twice.  Place on the bottom left.  Move the heart up above Element 102.

11.  Paste Element 75 on to the canvas.  Resize by 50% once and then by 75%.  Place behind the heart on top.

12.  Paste Element 68 on to the canvas.  Resize by 50% twice.  Place on the top left.

13.  Paste Element 31 on to the canvas.  Resize by 50% once.  Place on the bottom right.

14.  Paste Element 85 on to the canvas.  Send this to the bottom in the layer palette.

15.  Paste Element 17 on to the canvas.  Bring this to the top in the layer palette.  Resize by 75% once.  Place on the bottom.

16.  Paste tube of choice on to the canvas.  Resize it as needed.  Add copyright.

17.  Add name and save as a pspimage.  Add any effects you like.  Crop and resize as needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.

Winter Glow

Winter Glow
©Barbara Butler
October 2013

Materials
Kit-Warm Winter Glow by Amy Marie.  You can fine this gem at www.amymarieskits.com
Mask-  WSL269

01.  New image 800X600 72dpi.

02.  Select all, paste Pp9 into selection.  Select none.  Apply the mask.  Merge the mask group together.  Resize by 85%.  Select all, float, defloat.  Add a new layer flood fill a color from the paper.  Move this layer down below the paper.  Change the blend mode that will show through a little bit through the paper above the color i used was #b3bda5 so i changed mine to burn.

03.  Paste  Element 1 on to the canvas.  Resize by 75% once.  Place on the left.  Duplicate, mirror, and move over to the rigth side.

04.  Paste Element 16 on to the canvas.  Resize by 75% three times.  Place in the middle of the branches.

05.  Paste Element 20 on to the canvas.  Resize by 75% twice.  Place on the right side of the first ornament.

06.  Paste Element 46 on to the canvas.  Resize by 75% once.  Place behind the ornaments.

07.  Paste Element 44 on to the canvas.   Place move in front of the branch on the left side.  Duplicate, mirror and place this one on the right side.

08.  Paste Element 51 on to the canvas.  Resize by 75% twice.  Place on the left side of the bear and move it behind it in the layer palette.

09.  Paste Element 62 on to the canvas.  Place behind the other elements and change the blend mode to Luminance (L).

10.  Paste Element 103 on to the canvas.  Resize by 75% twice.  Bring it to the top and place it on the right side of the ornament.

11.  Paste Element 101 on to the canvas.  Resize by 75% twice.  Mirror it and place it in front of the ornaments.

12.  Paste Element 108 on to the canvas.  Place beside the right side of the bear.

13.  Paste tube of choice on to the canvas.  Resize it as needed.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

PrettyPrincess

Pretty Princess
©Barbara Butler
October 2013

Materials
Kit-Princessella by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com

01.  New image 800X600 72dpi.

02.  Paste Element 60 on to the canvas.  Resize by 85% once.  Take the magic wand and click on the inside of the frame.  Expand the selection by 5, add a new layer and paste Pp14 into the selection.  Select none.  Move the paper layer below the frame.

03.  Paste Element 6 on to the canvas.  Use the deform tool and stretch it out until it is over the edge of the frame.

04.  Paste Element 11 on to the canvas.  Resize by 75% twice.  Place in the middle of the paper layer.

05.  Paste Element 14 on to the canvas.  Resize by 50% twice and place on the left side of the castle.

06.  Paste Element 17 on to the canvas.  Resize by 50% once.  Place on the top right.

07.  Paste Element 23 on to the canvas.  Resize by 75% twice.  Place on the bottom right.

08.  Paste Element 65 on to the canvas.  Resize by 75% twice.  Place behind the heart.

09.  Paste Element 79 on to the canvas.  Resize by 75% once.  Place on the top.

10.  Paste Element 82 on to the canvas.  Resize by 75% four times.  And place on top of Element 79.

11.  Paste Element 84 on to the canvas.  Resize by 75% twice.  Place on the bottom right.

12.  Paste Element 62 on to the canvas.  Place on the left side and send it to the bottom.

13  Merge all the elments on the bottom right and resize them by 85% once.  Add some drop shadows to the elements you would like.  I added it to the vines and the castle.

14.  Add tube of choice to the canvas.  Resize it as needed.  Add copyright layer.

15.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Little Country Girl

Little Country Girl
©Barbara Butler
October 2013

Materials:
Kit-Cowboy Sweetheart by Amy Marie.  This kit can be found at www.amymarieskits.com

01.  Open up Pp027 duplicate shift+D.  Paste Element 7 on to the paper, place on the left side.  Paste Element 66 on to the paper.  Resize by 50% once then by 75% once, place on the right side.  Paste Element 41 on to the canvas, resize by 50% once.  Place in front of Element 7 on the left.  Paste Element 2 on to the canvas.  Resize by 50% once and place beside the other horse.  Paste Element 17 on to the canvas.  Place on the top right.  Merge visible.  Copy this CTRL+C.  You can close this now, we wont be using it again.

02.  Open up a new image 800X600 72dpi.  Paste Element 39 on to the canvas.  Take the magic wand and click on the inside.  Expand the selection by 5, add a new layer and paste the paper we just did into the selection.  Move it down below the frame.  Now merge these two together. 

03.  Paste Element 38 on to the canvas.  Resize by 75% three times.  Place on the right side.

04.  Paste Element 27 on to the canvas.  Resize by 75% once.  Place on the bottom and below Element 38.

05.  Paste Element 1 on to the canvas.  Resizes by 75% four times.  Rotate 15 degrees to the right.  Duplicate it, mirror the duplicate and move it to the right.  Merge the two together.  Rotate 15 degrees to the left.  Place on the bottom left.  Add a gradient glow of choice.

06.  Paste Element 36 on to the canvas.  Place on the top.

07.  Paste Element 40 on to the canvas.  Resize by 75% once.  Mirror it and place it on the bottom beside Element 27 on the left side.

08.  Paste Element 50 on to the canvas.  Resize by 75% once.  Place on the top right and move it below the frame.

09.  Paste Element 58 on to the canvas.  Resize by 75% twice.  Bring it to the top and place on the top left.

10.  Paste tube of choice on to the canvas.  Resize if needed.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Fresh Winter

Fresh Winter
©Barbara Butler
October 2013

Materials
Kit-WinterFresh by Amy Marie.  Kit can be found at www.amymarieskits.com

01.  New Canvas 800X600 72dpi.

02.  Paste Let It Snow on to the canvas.  Place it towards the bottom.

03.  Paste Tree 2 on to the canvas.  Resize by 65% once.  Place behind and on the left of the wordart.

04.  Paste Winter Bear on to the canvas. Resize by 65% twice.  Place on the left side and in front of the wordart.

05.  Paste Snowman 2 on to the canvas.  Resize by 65% once.  Place on the right side.  You might need to make the canvas a little bit bigger so the whole element is on the canvas.  I resized mine by 900X675.

06.  Paste Skate1 on to the canvas.  Resize by 50% once then by 65% once.  Place on the bottom in front of the wordart.  Duplicate the skate, mirror it and then rotate it 15 degrees to the right.  Place beside the original.

07.  Paste Cat on to the canvas.  Resize by 65% once.  Place beside the snowman.

08.  Paste Element 2 on to the canvas.  Send it to the bottom in the layer palette.  Add the following drop shadow.  V.2 H.0 Op.100 Bl.0 Color 0898c0

09.  Paste Berries on to the canvas.  Resize by 65% once.  Place on the bottom and behind the wordart.  Duplicate and mirror the duplicate, move it over to the right.

10.  Paste tube of choice on to the canvas.  Resize it as needed.  Place to your liking.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects you want.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Down Home Fall

Down Home-Fall
©Barbara Butler
October 2013

Materials:
Scrap Kit-Fall Down Home by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL169

01.  New image 800X600 72dpi.

02.  Paste Pp3 on to the canvas.  Apply the mask and merge the mask group.  Duplicate it a couple of times and merge them all together.

03.  Paste Element 85 on to the canvas.  Resize by 85% once.  Use the deform tool and stretch the ends out a little bit.

04.  Paste Element 47 on to the canvas.  Resize by 75% once and place it on the bottom left.

05.  Paste Element 46 on to the canvas.  Place on the right side.

06.  Paste Element 39 on to the canvas.  Resize by 75% once then by 85% twice.  Place in front of Element 46.

07.  Paste Element 76 on to the canvas.  Resize by 75% twice.  Place in front of Element 39.

08.  Paste Element 84 on to the canvas.  Resize by 75% once.  Place on the left side.

09.  Paste Element 113 on to the canvas.  Duplicate it mirror the duplicate and move it over to the left so the ends meet.  Merge the two together.  Resize by 75% once.

10.  Paste tube of choice to the canvas.  Resize as needed.  Place to your liking.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.

On Blue Ice

On Blue Ice
©Barbara Butler
October 2013

Materials:
Scrap Kit-Blue Ice by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Template-Xmas 10 by Tamie of addictive pleasures

01.  Open template.  Check to make sure it is at 72dpi.  Duplicate the template and close the original.  Delete the copy right and wordart layers.  Make the canvas a little bit bigger so you can fit the elements on it.

02.  Oval:  Select all, float, defloat.  Paste Pp14 into the selection.  Select none.

03.  Rectangle:  Select all, float, defloat.  Paste Pp13 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

04.  GlitterRectangle:  Select all, float, defloat.  Paste Pp10 into the selection.  Select none.

05.  Circle:  Select all, float, defloat.  Paste Pp6 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

06.  Strip:  Select all, float, defloat.  Paste Pp1 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

07.  Square:  Select all, float, defloat.  Paste Pp5 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

08.  Square 2:  Select all, float, defloat.  Paste Pp8 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

09.  Paste Element 33 on to the canvas.  Resize by 75% twice.  Place on the bottom left.

10.  Paste Element 40 on to the canvas.  Resize by 75% once.  Place on the left, and move below the strip layer in the layer palette.

11.  Paste Element 42 on to the canvas.  Resize by 75% twice.  Place on the right side on top of the strip.

12.  Paste Element 48 on to the canvas.  Place on the left side and behind Element 33.

13.  Paste Element 56 on to the canvas.  Resize by 75% twice.  Place on the right side of the rectangle.

14.  Paste Element 61 on to the canvas.  Resize by 75% twice.  Place on the left side and below Element 33.

15.  Paste Element 65 on to the canvas.  Move to the left side and place in front of the circle layer.

16.  Paste Element 74 on to the canvas.  Resize by 75% once.  Mirror it and place right behind the Element 42.

17.  Paste Element 105 on to the canvas.  Place to the left and behind Element 42.

18.  Paste tube(s) of choice on to the canvas.  Resize as needed.  Place to your liking.

19.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Ice Princess Purple

Ice Princess Purple
©Barbara Butler
October 2013

Materials:
Scrap Kit-PurpleIce By Amy Marie.  This kit can be found at www.amymarieskits.com
www.amymarieskits.com
01.  New image 800X600 72dpi

02.  Paste Element 13 on to the canvas.  Resize by 85% once.  Take the magic wand and click on the inside.  Add a new layer and paste Pp12 into the selection.

03.  Paste Element 11 on to the canvas.  Rotate 15 degrees to the left.  Place on the left side.

04.  Paste Element 26 on to the canvas.  Resize by 75% once.  Place on the bottom right and send to the bottom in the layer palette.

05.  Paste Element 38 on to the canvas.  Resize by 75% once.  Place on the left side.  Place below Element 11 in the layer palette.

06.  Paste Element 55 on to the canvas.  Resize by 50% once.  Mirror it and place it on the bottom right.

07.  Paste Element 58 on to the canvas.  Resize by 50% once.  Place on the bottom left.

08.  Paste Element 72 on to the canvas.  Place it above the paper layer in the layer palette.  Now on the paper layer select all, float, defloat invert the selection and go back to the element and hit the delete key.  Select none.

09.  Paste Element 83 on to the canvas.  Resize by 85% once.  Place it on the bottom.  Make sure its back on top.

10.  Paste Element 73 on to the canvas.  Resize by 50% once.  Rotate 15 degrees to the left.  Place on the top right.

11.  Paste Element 71 on to the canvas.  Move down a little bit in the layer palette so its below some of the elements like the flowers.  Now go back to the paper layer again select all, float, defloat, invert the selection go back to the element and hit the delete key.  If you want you can duplicate this layer so you can see it a little bit better or you can leave it as is.

12.  Paste Element 46 on to the canvas.  Resize by 50% once.  Place behind Element 83.  Now to delete some of the excess off go back to the paper layer and select all, float, defloat, invert the selection back on the element layer hit the delete key.

13.  Paste tube(s) of choice on to the canvas.  Resize as needed.  Place to your liking.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects you want.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Winter Blues

Winter Blues
©Barbara Butler
October 2013

Materials:
Scrap Kit- Blue Winter by Amy Marie.  This kit can be found at www.amymarieskits.com

01.  New image 800X600 72dpi.

02.  Paste Element 3 on to the canvas.  Resize by 85% once.

03.  Paste Element 81 on to the canvas.

04.  Paste Element 75 on to the canvas.  Resize by 75% three times.  Place on the bottom left.

05.  Paste Element 74 on to the canvas.  Resize by 75% three times.  Rotate 15 degrees to the right.  Place behind the skate.

06.  Paste Element 73 on to the canvas.  Resize by 75% twice.  Place behind the gloves.

07.  Paste Element 63 on to the canvas.  Resize by 50% once.  Place on the bottom right.

08.  Paste Element 76 on to the canvas. Resize by 50% once.  Place on the top left.

09.  Paste Element 78 on to the canvas.  Resize by 50% once.  Place on the bottom right and behind Element 63.

10.  Paste Pp11 on to the canvas.  Send it to the bottom.  Add a mask of choice.  Merge the mask group.

11.  Paste Element 70 on to the canvas.  Bring to the top of the canvas.  And place it on the bottom.

12.  Paste Element 27 on to the canvas.  Place in front of the paper layer.  Apply a drop shadow of choice.

13.  Paste tube of choice on to the canvas.  Resize as needed.  Place to your liking.  I resized mine by 75% twice placed it in front of Element 27, there was a little bit hanging below the scarf on the bottom so I took my eraser and deleted some of it.  Add copyright stuff.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Classy Diva

Classy Lady
©Barbara Butler
October 2013

Materials:
Scrap Kit-Classic Diva by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL194

New image 800X600 72dpi

01.  Paste Pp11 on to the canvas.  Load mask from disk and apply the mask.

02.  Paste Element 5 on to the canvas.  Resize by 75% twice.  Place on the top left and mirror it.

03.  Paste Element 10 on to the canvas.  Resize by 75% twice.  Mirror it and place on the bottom left.

04.  Paste Element 13 on to the canvas.  Place on the bottom left and behind the car.

05.  Paste Element 41 on to the canvas.  Place on the bottom and below element 13.

06.  Paste Element 48 on to the canvas.  Resize by 75% once.  Place on the bottom right.

07.  Paste Element 56 on to the canvas.  Resize by 75% once.  Place behind Element 48 on the right.

08.  Paste Element 72 on to the canvas.  Place behind the elements on the right.

09.  Paste all four ladies (Elements 68-71) on to the canvas, place in any order you would like.  Merge them together.  Resize them by 75% once.

10.  Paste Element 20 on to the canvas.  Place on the bottom.

11.  Paste Element 18 on to the canvas.  Place on the top.

12.  Paste tube of choice on to the canvas.  Resize as needed.  Add copyright.

13.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Chell

Chell
©Barbara Butler
October 2013

Materials
Scrap Kit-Chell by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com



01.  New Image 800X600 72DPI.

02.  Paste Element 16 on to the canvas.  Take the magic wand and click on the inside of the frame.  Expand the selection a little bit.  Paste Pp011 as a new layer, invert the selection and hit the delete key.  Move the paper layer below the frame in the layer palette.

03.  Paste Element 30 on to the selection.  Place on the bottom of the frame.

04.  Paste Element 31 on to the canvas.  Resize by 75% once.  Place on the left side.

05.  Paste Element 23 on to the canvas.  Resize by 75% twice.  Place on the right side.

06.  Paste Element 22 on to the canvas.  Resize by 75% three times.  Place on the right side.

07.  Paste Element 14 on to the canvas.  Resize by 75% twice.  Place on the left side.

08.  Paste Element 51 on the canvas.  Resizes by 85% once.  Place on the right side behind the other two elements.

09.  Paste Element 52 on to the canvas.  Resize by 50% once then by 75% once.  Place in front of the elements on the right side.

10.  Paste Element 98 on to the canvas.  Resize by 50% once then by 75% once.  Place on the left side and on top of the other element.

11.  Paste Element 106 on to the canvas.  Resize by 7% twice.  Place on the left side and in front of Element 31.

12.  Paste Element 45 on to the canvas.  Place on the right side and send it to the bottom in the layer palette.

13.  Paste Elements 64 and 70 on to the canvas.  Place these to your liking.

14.  Paste your tube of choice on to the canvas.  Resize as needed.  Add copyright.

15.  Add name and save as a pspimage.  Add any effects.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

A Pink Christmas

A Pink Christmas
©Barbara Butler
October 2013

Materials:
Scrap Kit-Winter Rose3 by Amy Marie.  This kit can be found at www.amymarieskits.com
www.amymarieskits.com
Template-162 by Leah.  This template can be found at www.amyandleahsgimptastictuts.com.

01.  Open the template and make sure it is at 72 dpi.  Delete the copyright layer and wordart layers.  Resize the canvas to a little bit bigger size so you can fit the elements on it.  We will be cropping it later.

02.  Layer 6 select all, float, defloat.  Paste Pp2 into selection.  Select none.

03.  Layer 2 select all, float, defloat.  Paste Pp13 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

04.  Layer 4 select all, float, defloat.  Paste Pp13 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

05.  Layers 8 and 9.  Select all, float, defloat.  Paste Pp10 into selection.  Select none.

06.  Layer 13 select all, float, defloat.  Paste Pp7 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

07.  Layers 11 and 12.  Select all, float, defloat.  Paste Pp3 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layers.

08.  Layer 7 select all, float, defloat.  Paste Pp1 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

09.  Layer 6 select all, float, defloat.  Paste Pp11 into the selection.  Select none.

10.  Layer 10 select all, float, defloat.  Paste Pp12 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

11.  Paste Element 6 on to the canvas.  Resize by 75% twice.  Place on the left side.

12.  Paste Element 5 on to the canvas.  Resize by 75% twice.  Place beside the other tree.

13.  Paste Element 36 on to the canvas.  Resize by 75% three times.  Place on the bottom right.  Rotate 90 degrees to the left.

14.  Paste Element 38 on to the canvas.  Resize by 75% once.  Place on the right and behind the other rose.

15.  Paste Element 64 on to the canvas.  Place in front of the rectangle layer.

16.  Paste Element 102 on to the canvas.  Resize by 50% once.  Place in front of the elements on the right.

17.  Pate Element 19 on to the canvas.  Resize by 50% once.  Place on the right side.

18.  Paste tube of choice on to the canvas.  Resize as needed.  Place to your liking.  Add copyright.

19.  Add name and save as a pspimage.  Add any effect you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Blue Dreams

Blue Dreams
©Barbara Butler
October 2013

Materials:
Scrap Kit
Blue Dreams by Amy Marie. This kit can be found at www.amymarieskits.com
Mask
WSL169

01.  New image 800X600 72 DPI

02.  Paste Element 2 on to the canvas.  Place on the bottom right.  Duplicate it, rotate the duplicate 90 degrees to the right.  Place to the right of the original one.

03.  Paste Element 13 on to the canvas.  Resize by 75%.  Place on the bottom right.

04.  Paste Element 19 on to the canvas.  Place on the right side.

05.  Paste Element 78 on to the canvas.  Resize by 75% twice.  Mirror it and place on the right side of the fan.

06.  Paste Element 99 on to the canvas.  Resize by 75% twice.  Place behind the top three elements on the right.

07.  Paste Element 104 on to the canvas.  Resize by 75% once.  Place in front of the fan.

08.  Select all add a new layer and paste a paper of choice into selection, I used Pp5.   Apply the mask and merge the mask group.  Send this layer to the bottom.

09.  Paste Element 90 on to the canvas.  Place to your liking.

10.  Paste Element 89 on to the canvas.  Duplicate twice and place to your liking.

11.  Paste tube of choice on to the canvas.  Resize as needed.  Add copyright info.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Purple Rose

Purple Rose
©Barbara Butler
October 2013

Materials:
Scrap Kit:  Winter Rose 2 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  CV_Template8 by Template by Salsa.  This template can be found at charmedvixenz.blogspot.com.

01.  Open template and make sure it is at 72 dpi.  Duplicate the template and close the original.  Delete the copyright layer.  Resize the canvas to about 900X683 so you can fit the elements, we will be cropping it later on.

02.  Black rectangle select all, float, defloat.  Hit the delete key and paste Pp2 into selection.

03.  Top circle select all, float, defloat.  Paste Pp3 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

04.  Bottom circle select all, float, defloat.  Paste Pp3 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

05.  Top Square select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

06.  Top Square select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

07.  Pink Oval select all, float, defloat.  Hit the delete a couple of times and paste Pp10 into the selection.

08.  Black Circle select all, float, defloat.  Paste Pp13 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

09.  White Rectangle select all, float, defloat.  Paste Pp6 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

10.  Yellow Squares select all, float, deflaot.  Paste Pp12 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

11.  Paste Element 21 on to the canvas.  Resize by 75% once.  Place on the bottom right.

12.  Paste Element 28 on to the canvas.  Resize by 75% once and place on the bottom left.

13.  Paste Element 32 on to the canvas.  Resize by 75% once.  Place on the bottom left, on the left side of the other plant.

14.  Paste Element 34 on to the canvas.  Place on the left side and behind the other elements.

15.  Paste Element 39 on to the canvas.  Resize by 75% three times.  Rotate 15 degrees to the right and place beside the apple.

16.  Paste Element 102 on to the canvas.  Resize by 75% twice.  Place on the top right of the rectangle.

17.  Paste Element 105 on to the canvas.  Resize by 75% twice.  Place behind the elements on the right.

18.  Paste Element 100 on to the canvas.  Place behind the apple.

19.  Paste Elements 71 and 72 on to the canvas.  Place 71 on the left and 72 beside it on the right (make sure the tops meet up).  Merge the two together.  Now Paste Element 78 on to the canvas and place over the ornaments.  Now we're going to delete some of the left side so go to layers, new mask group, show all, take your eraser tool and delete some of the ribbon so it looks like its looped through the ornaments, merge mask group.  Now Paste Element 74 on to the canvas, paste Element 73 on to the canvas over the other snowflake, resize this one by 75% once, place in the middle of the ribbon.   Now Merge all these elements together.  Now resize them by 50% once and then by 75% once.  Place in the middle on the bottom.

20.  Paste Element 66 on to the canvas.  Resize by 50% once and place on the top right.

21.  Paste Element 79 on the canvas.  Place on the bottom and move behind some of the other elements.

22.  Go to top rectangle go to selections, select all, float, defloat, add a new layer and paste Element 69 into selection.  Change the opacity 50%.

23.  Paste Element 15 on to the canvas.  Place behind the ornaments on the bottom.

24.  Paste Tube of choice on the canvas.  Resize as needed.  Place to your liking (depending on the tube you might need to move some of the elements around a little bit).  Add copyright.

25.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

♥Pretty Pretty Princess♥

Pretty Pretty Princess
©Barbara Butler
October 2013

Materials:
Scrap Kit-Pretty Princess by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL169


01.  New Image 900X675 72dpi.

02.  Paste Pp1 on to the canvas.  Apply mask and merge mask group.  Duplicate the layer two times and then merge the three together.

03.  Paste Element 7 on to the canvas.  Resize by 75% three times and place on the bottom left.

04.  Paste Element 1 on to the canvas.  Resize by 75% twice and place on top of Element 7.

05.  Paste Element 14 on to the canvas.  Resize by 75% twice and place on the bottom right.

06.  Paste Element 32 on to the canvas.  Mirror it and place it on the left side.  Paste it on the canvas again and place this one on the right side.

07.  Paste Element 62 on to the canvas twice.  Place one on the top left, mirror the other and place that one on the top right.  Merge the two together.   Go to your paper layer select all, float, defloat.  Invert the selection and go back to the element and hit the delete key.

08.  Paste Element 60 on to the canvas.  Resize by 75% twice and place beside the leaf on the right side.

09.  Paste Element 65 on to the canvas.  Place behind the Element 62 on top.

10.  Paste Element 68 on to the canvas.  Place on the right side and below the other elements.

11.  Paste Element 66 on to the canvas.  Place it on the bottom and below the other elements.

12.  Paste Element 79 on to the canvas.  Resize it by 75% three times.  Mirror it and place in front of the leaf.

13.  Paste Element 95 on to the canvas.  Resize it by 75% twice.  Place on the bottom.

14.  Paste Element 111 on to the canvas.  Resizes it by 75% twice and place it on the top left.

15.  Paste tube of choice on to the canvas.  Resize as needed and place to your liking (depending on the tube you might want to move some of the elements around a little).  Add copyright.

16.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Dreams In Pink

Dreams In Pink
©Barbara Butler
October 2013

Materials:
Scrap Kit-Pink Dreams by Amy Marie.  This kit can be found at www.amymarieskits.com
Instructions:

01.  New Image 800X600 72dpi.

02.  Paste Element 24 on to the canvas.  Resize by 75% once.

03.  Paste Element 79 on to the canvas.  Place on the left side of the frame.

04.  Paste Element 83 on to the canvas.  Place on the righ side of the frame.

05.  Paste Element 86 on to the canvas.  Resize by 75% once.  Place on the right side and behind Element 83.

06.  Paste Element 74 on to the canvas.  Place on the right side.  Mirror it and place it on top of the elements on the right and the other end below the elements on the left (you might need to move the ones on the left up).

07.  Paste Element 66 on to the canvas.  Resize by 75% three times.  Rotate 15 degrees to the left.  Place on the left side.

08.  Paste Element 65 on to the canvas.  Resizes by 50% once.  Place it on the right side and behind Element 74.

09.  Paste Element 53 on to the canvas.  Resize by 50% once.  Place on the bottom right.

10.  Paste Element 42 on to the canvas.  Resize by 50% once.  Rotate 30 degrees to the left.

11.  Paste Element 10 on to the canvas.  Resize by 50% and place on the bottom.

12.  Back on the frame layer take the magic wand and click on the inside.  Paste Pp014 as a new layer, invert the selection and hit delete.  Select none.  Move the paper layer below the frame. 

13.  On the paper layer select all, float, defloat.  Now paste your tube of choice as a new layer (if your tube has a close up use that) resize it a little bit, invert the selection and hit delete, change the blend mode to whatever looks good with the tube you chose.   Paste the main tube on to the canvas and resize as needed take your eraser and delete the bottom of the tube that sticks out on the bottom.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects, crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Winter Rose

Winter Rose
©Barbara Butler
October 2013

Materials:
Scrap Kit:
Winter Rose by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Template:
Temp119-Leah.  This template can be found at http://amyleahsgimptastictuts.blogspot.com
Tube:   Winter Rose by Ninaste.  This tube can be found at http://beehivestudio-store.com/store


01.  Open up template.  Make sure it is at 72dpi.  Duplicate it and close the original.  Delete the copyright and wordart layers.  Change the canvas size to a bigger size so you can place the elements.  Don't worry you'll be cropping it at the end.

02.  On Square 2 select all, float, defloat.  Paste Pp11 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

03.  On Square 1 select all, float, defloat.  Paste Pp10 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

04.  On Rect 3 select all, float, defloat.  Paste Pp12 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

05.  On Rect 2 select all, float, defloat.  Paste Pp8 into selection.  Select none.

06.  On Circle 2 select all, float, defloat, hit the delete key a couple of times.  Paste Pp3 into selection.  Select none.

07.  On Circle 3 select all, float, defloat, hit the delete key a couple of times.  Paste Pp7 into selection.  Select none.

08.  On Circle 1 select all, float, defloat.  Paste Pp1 into selection.  Select none.

09.  On Frame layer select all, float, defloat.  Paste Pp1 as a new layer, invert the selection and hit delete.  Delete or close the original layer.

10.  On Rect 1 select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

11.  Paste Element 15 on to the canvas.  Resize by 75% once.  Place on the bottom left.

12.  Paste Element 12 on to the canvas. Resize by 75% twice.  Place behind Element 15.

13.  Paste Element 103 on to the canvas.  Resize by 75% twice.  Mirror it and place in front of the tree on the left.

14.  Paste Element 102 on to the canvas.  Resize by 75% twice and place on the top right.

15.  Paste Element 104 on to the canvas.  Resize by 75% twice.  Mirror it and place on the left side.

16.  Paste Element 65 on to the canvas.  Resize by 75% once.  Move over to the right.

17.  Paste Element 64 on to the canvas.  Leave it right where it is.

18.  Paste Element 52 on to the canvas.  Resize by 75% once.  Place it on the right side and move it to the bottom

19.  Paste Element 49 on to the canvas.  Place behind the elements on top.

20.  Paste Element 27 on to the canvas.  Place on the right side.  Resize by 75% once.

21.  Paste Elements 89 and 90 on to the canvas.  Resize these to your liking.  Place them on the bottom and behind the other elements.  (You might want to move the other elements around a little bit).

22.  Paste Close Up Tube on to the canvas.  Resize it as needed.  Move it down in front of the big circle. On that layer select all, float, defloat, invert the selection and hit delete.  Change the blend mode to screen.

23.  Paste the main tube on to the canvas.  Resize it as needed and place to your liking.  Add copyright.

24.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Autumn Whispers

Autumn Whispers
©Barbara Butler
October 2013

Materials
Scrap kit:
Autumn Whispers 2 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:
Template#34 by Rissa's Designs.  This template can be found at http://rissasdesigns.com

Lets Begin.

01.  Open up template.  Make sure it is at 72dpi.  Duplicate the template and close the original.  Delete the copyright layer.

02.  On Layer 3 select all, float, defloat.  Paste Pp6 into selection.  Select none.

03.  On Layer 1 select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

04.  On Layer 2 select all, float, defloat.  Paste Pp9 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

05.  On Layer 7 select all, float, defloat.  Paste Pp14 into selection.  Select none.

06.  On Layer 6 select all, float, defloat.  Paste Pp19 into selection.  Select none.

07.  On Layer 5 select all, float, defloat.  Paste Pp1 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

08.  On Layer 4 select all, float, defloat.  Paste Pp3 as a new layer, invert the selection and hit delete.  Select none.  Delete or close the original layer.

09.  Paste Element 3 on to the canvas.  Resize by 75% once.  Place on the bottom right.

10.  Paste Element 11 on to the canvas.  Resizes by 75% once.  Place on the bottom right.

11.  Paste Element 22 on to the canvas.  Resize by 75% twice.  Rotate 15 degrees to the left.  Place on the top left.

12.  Paste Element 24 on to the canvas.  Resize by 75% once and place behind Element 3 on the right side.

13.  Paste Element 34 on to the canvas.  Place behind the other elements on the right.

14.  Paste Element 62 on to the canvas.  Resize by 75% three times.  Place on the bottom left. 

15.  Paste Element 63 on to the canvas.  Place towards the top and behind Layer 7.

16.  Paste Element 64 on to the canvas.  Place on the bottom in front of the other elements.

17.  Paste Element 72 on to the canvas.  Mirror it, move it a little to the right and send it to the bottom.

18.  Paste Element 79 on to the canvas.  Move it below the elements on the top.

19.  Paste Element 85 on to the canvas.  Bring it to the top.  Move it down just a little bit.  Add a thin gradient glow, and a drop shadow.

20.  Paste Element 107 on to the canvas.  Resize by 75% twice.  Place behind Element 11.  Mirror it.

21.  Paste your tube on to the canvas.  Resize it as needed and place your liking.  Add the copyright.

22.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Once Upon A Dream

Once Upon A Dream
©Barbara Butler
October 2013

Materials:
Scrap kit-
Once Upon A Time by Amy Marie.  This kit can be found at www.amymarieskits.com

Instructions:

New Image 800X600

01.  Paste Element 62 on to the canvas. Resize by 85% once.   Take the magic wand and click on the inside of each slat.  Expand by 4.  Add a new layer and paste Pp017 into selection.  Select none.  Move the paper layer down.

02.  Paste Element 74 on to the canvas.  Place behind the window on the left side.  Duplicate it and move the duplicate over to the right.  Mirror the duplicate and move it back over to the left a little bit.

03.  Paste Element 80 on to the canvas.  Bring to the top if you're not there already.

04.  Paste Element 79 on to the canvas.  Resize by 85% once.  Place behind Element 80.

05.  Paste Element 90 on to the canvas.  Mirror and place it on the left behind Element 79.

06.  Paste Element 104 on to the canvas.  Resize by 75% twice.  Place on the right side.

07.  Paste Element 105 on to the canvas.  Resize by 75% three times.  Place in front of Element 104.

08.  Paste Element 115 on to the canvas. Place behind the mushrooms on the right.

09.  Paste Element 20 on to the canvas.  Resize by 75% three times.  Place on Element 115.

10.  Paste Element 13 on to the canvas.  Resizes by 75% three times.  Place on top of the ladder on the left side.

11.  Paste Element 14 on to the canvas.  Resize by 75% once.  Place on the right and behind the other elements.

12.  Paste Element 6 on to the canvas.  Resize by 50% and place on the top of the window.

13.  Paste Element 64 on to the canvas.  Place on the bottom and in front of the window.

14.  Select all add a new layer and paste Pp0017 into selection.  Select none.  Apply mask WSL 84.  Send this layer to the bottom.

15.  Add tube of choice.  Resize as needed and place to your liking.  Add copyright.

16.  Add name and save as a pspimage.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

♥Heavenly Angel♥

Heavenly Angel
©Barbara Butler
October 2013

Materials
Scrap Kit-
Jean by Amy Marie.  This kit can be found exclusively at www.amymarieskits.com
Mask-
WSL84.


Instructions

New Image 800X600

01.  Select all and paste Pp22 as a new layer.  Select none.  Load mask from disk.  Merge the mask group.

02.  Paste Element 79 on to canvas.  Resize by 75% twice.  Move down a little.

03.  Paste Element 80 on to canvas.  Resize by 75% twice.  Place at the bottom right of the stairs.

04.  Paste Element 125 on to canvas.  Resize by 75% once.  Mirror it and place it on the bottom right.

05.  Paste Element 70 on to canvas.  Place between the cat and angel.

06.  Paste Element 74 on to canvas.  Place on the left side.  Mirror it.

07.  Paste Element 75 on to canvas.  Place next to 74.

08.  Paste Element 76 on to canvas.  Resize by 75% twice.  Place on the top right of Element 75.  Duplicate it.  Mirror the duplicate and move it to the left.  Merge these together then merge them down with Elements 74 and 75.

09.  Paste Element 52 on to canvas.  Place it on top of the paper layer.

10.  Paste Element 126 on to canvas.  Bring it to the top and place on the bottom.  Duplicate a few times and move them around to your liking.

11.  Paste tube on to canvas.  Resize as needed.  Place to your liking.  Add the copyright.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.

Supernatural Girl

Supernatural Girl
©Barbara Butler
October 2013

Materials
Scrap Kit-
SuperNaturalPlay by Amy Marie.  This kit can be found at www.amymarieskits.com
New Image 800X600

Element 79-
Paste Element 79 on to canvas.  Place on the bottom.

Element 5-
Paste Element 5 on to canvas.  Place behind the cloud.

Element 9-
Paste Element 9 on to canvas.  Resize by 75% three times.  Place on the left side.

Element 11-
Paste Element 11 on to canvas.  Resize by 75% once.  Place behind Element 9.

Element 88-
Paste Element 88 on to canvas.  Resize by 65% twice.  Rotate 15 degrees to the left and place on the right side.

Element 91-
Paste Element 91 on to canvas.  Resize by 65% twice.  Place behind Element 88.

Element 94-
Paste Element 94 on to canvas.  Resize by 85% once.  Place in front of the moon.

Element 138-
Paste Element 138 on to canvas.  Place behind the elements on the right side.

Element 144-
Paste Element 144 on to canvas.  Resize by 65% twice.   Mirror it and place it in front of the elements on the right.

Element 139-
Paste Element 139 on to canvas.  Resize by 65% twice.  Place on top of the moon.

Element 153-
Paste Element 153 on to canvas.  Place to your liking.


Tube-
Paste tube of choice on to canvas.  Resize as needed and place to your liking.  Add copyright layer.

Pp 10-
Crop your tag a little bit.  Select all add a new layer and paste Pp10 into selection.  Send it to the bottom.

Finishing touches-
Add name and save as a pspimage.  Add any effects you would like.  Resize as needed.  Save as png and you are done.

Thank you for taking a look at my tut.