Parisian Cabaret

Parisian Cabaret
©Barbara Butler
February 24, 2013

Supplies:
Scrap Kit:  Parisian Cabaret by BLT Designz can be found Here
Template:  Temp12_2013 by Xoiya Creations be found Here
Font:  Cherish can be found at dafont.com
Tube:  Barbara by Very Many can be found Here.  Please do not use without buying it and having the proper license to use it.

This tut was written from my own imagination.  Any resemblence is purely coincidental.  Remember to save often.Let's Begin:
Open up template.  Duplicate and close the original.
Paper Instructions:
Raster2 select all, float, defloat paste PP7 into selection.
Raster3 select all, float, defloat, paste PP9 into selection.
Raster4 select all, float, defloat paste PP6 onto canvas, invert and hit delete.  Unselect.
Merge Rasters 6 and Copy of Raster 6 together.  Select all, float, defloat paste PP10 onto canvas.  Invert and hit delete.  Unselect.
Merge Rasters 5 and Copy of Raster 5 together.  Select all, float, defloat paste PP5 onto canvas.  Invert and hit delete.  Unselect.

Element Instructions:
As usual all elements are resized by 75% unless other wise stated.  See my tag for placement of each element.

Paste Shoe onto the canvas and resize three times.
Paste Rose onto the canvas resize three times and mirror.
Paste RicRac onto canvas.  No need to resize.  In the layer palette place below the Rose and Shoe layers.
Paste Wordart onto canvas, and resize twice and move to the bottom just above the RicRac.
Paste Stamp onto canvas, and resize four times.  Free rotate 15 degrees to the left.
Paste Kitty onto canvas, mirror and resize three times.  Move to the right.
Paste Parason onto canvas, resize three times.  Free rotate 15 degrees to the right.  Place between the Shoe and Stamp.
Paste Fan onto canvas and resize twice.  Free rotate 15 degrees to the left and place right behind the kitty.
Paste Buttons onto canvas and resize three times.  Move to the left of the Wordart and behind it in the layer palette.
Back on the wordart layer to make it pop add a gradient glow, inner bevel and drop shadow of choice.

Paste tube of choice.  Add copyright and save as either a psp or psd.
Add name resize as needed and save as a png. 

Thank you for taking a look at my tut.  Hope you enjoyed.

Girls Night Out

Girls Night Out
©Barbara Butler

Supplies Needed:

Scrap Kit:  Girls Night Out By Freaks Creations Found Here

Template05_2013 By Me Found Here

WSLMask84  Link to her website is on the side.

Photo editing program of choice.  I use PSP X4 but any program should work just fine.

A few tubes of choice.  I used the artwork of Verymany in one example.  And the artwork of Keith Garvey in another. Please don't use either of these without buying them and having a license to use them.  Verymany can be found at PFD and Keith Garvey has his own store.  All links are on the side.

This tut was written by me and any similarities to any other tutorial is purely coincidental.  It was written for those with working knowledge of psp.

Remember to save often

Let's Begin

Open template, duplicate and close the original.  Delete the copyright layer.

Paper Instructions:

On the very bottom layer select all and paste P1 into selection.  Unselect.  Apply the mask and merge the mask group.

On raster 3 select all, float, defloat, paste P7 onto canvas invert and hit delete.  Unselect.

On raster 7 select all, float, defloat, past P5 onto canvas ivert and hit delete.  Unselect.

On the middle rectangle select all, float, defloat and paste P12 into selection.  Unselect.

On the other two layers select all, float, defloat and paste P9 into selection.  Unselect.

On Raster 4 select all, float, defloat, paste P10 onto canvas invert and hit delete.  Unselect.  Repeat for Copy of Raster 4.

Element Instructions:*
*All elements are resized by 75% unless stated other wise stated.

Paste E11 onto canvas just behind the bottom rectangle.  No resizing is necessary for this.  Just move it down a little so you can see the three rectangles behind it.  See mine for proper placement.

Paste E2 onto canvas bring to the top in the layer palette.  Resize three times and place to the left.  

Paste E3 onto canvas.  Resize by 75% once and then by 85% and move down in front of the piano keys.

Paste E16 onto canvas put behind E11 and the wordart.  No resizing necessary.  See my tag for proper placement.

Paste E20 onto canvas move to the right.  No resizing necessary.  See my tag for proper placement.

Paste E23 onto canvas.  Resize three times, and move to left the left of the left rectangle.

Paste E22 onto canvas.  Mirror and resize four times and move to the bottom left of E23.

Paste E27 onto canvas.  Resize once.  Mirror and move to the right.  In the layer palette move it just above the mask layer.

Paste E5 onto canvas.  Resize twice.  Free rotate 15 degrees to the right.  Move to the right just below the piano keys and the banner.

Paste E7 onto canvas.  Resize once, move to the right and below the rectangle layers.  Make sure none of the top part is showing.  Duplicate, mirror and move to the left.

Paste E4 onto canvas.  Resize three times.  Move behind the fan.  Duplicate two times (So it is not transparent) and merge these three layers.

Paste Your tubes onto the canvas.  Resize as necessary.  And place to your liking. 

Add copyright and save as a psp. 

Add name and any effects you want to the name.  I like using a gradient glow, resize as needed and save as png.

Thank you for taking a look at my tut.

Here is the one with Keith Garvey tubes.

Sweet Cherry Pie

Sweet Cherry Pie
©Barbara Butler

Supplies Needed:
Scrap Kit:  Berry Cherry By Stef's Scraps can be found Here
Template:  SST Temp1 Creative Misfits Forum can be found Here
Mask: Hearts10 By Angela Creative Misfits Forum can be found Here
Tube of choice.  I'm using one from Pinuptoons it can be found at CDO.  Please do not use without the proper license and buying the tube.

This Tutorial was written from my own imagination.  Any similarties to any other tutorial is purely coincidental.  It was written for those with a working knowledge of PSP.  I use PSPX4 but any should work.

Remember to save often.

Let's Begin:

Open template, duplicate and close the original.  Delete the copyright layer.

Paper Instructions:
Rectangle Layer Select all>float> defloat paste Pap05 onto canvas invert and hit delete.  Unselect.

Rectangle Frame Select all>float>defloat paste Pap10 into selection.  Unselect.

Top Stripe Select all>float>defloat paste Pap03 onto canvas invert and hit delete.  Unselect.  Repeat for Bottom Stripe.

 Middle Stripe Select all>float>defloat paste Pap01 onto canvas invert and hit delete.  Unselect.

Middle Heart Select all>float>defloat paste Pap09 into selection.

Right Heart Select all>float>defloat paste Pap7 onto canvas invert and hit delete.  Unselect.  Repeat for the left heart.

Small Hearts Select all>float>defloat paste Pap01 onto canvas again invert and hit delete.  Add a DS of choice.  If you don't do this you won't see the ones on the middle stripe since it is the same paper.

Add a drop shadow to the rectangle frame layer use the following settings:  V:1, H:0, O:80, B:17 C:Black

On the white background paste Pap04 and apply the mask.  You'll want to invert the mask data.

Element Instructions:
All elements will be resized by 75% unless otherwised posted.

Paste Elem04 resize twice and move behind the hearts.

Paste Elem12 resize twice and move just to the left of the fence.

Paste Elem21 resize five times and move to the top right corner of the frame.

Paste Elem38 resize three times and move to the left.

Paste Elem44 resize five times and move to the right of the fence. 

Paste Elem42 resize three times move to the right and behind Elem44.

Paste Elem41 resize twice move to the bottom.  Add the same drop shadow as before but change the Blur to 12.


Merge the three heart layers and add the same drop shadow.

Paste your tube onto canvas.  Place to your liking.  Add copyright and save as either a psp or psd. 

Add name and any embelishments you want resize as needed and save as a png.

A little side note.  The template is 300 dpi so to keep with artists TOU you will want to change it to 72 dpi.

Pinkalicious

Pink A Licious
©Barbara Butler
February 3, 2013

   

Materials Needed:
My Template Val02_2013
Scrap Kit Pink_a_li_cious by SSDesigns Can be found Here
Tube of choice.  I used the artwork of Keith Garvey.  Please do not use without purchasing it and having a license for it.

Open template.  Duplicate and delete the original.  Delete copyright information and the wordart.  Resize to 800 X 726.  Remember to save often.

Paper Instructions:
On Raster 4 select all, float, defloat, paste Paper 4 onto canvas, invert hit delete.  Unselect.

On Raster 2 select all, float, defloat, paste Paper9 onto canvas invert hit delete.  Unselect.

On Raster 3 select all, float, defloat, paste Paper6 into selection.  Unselect.

On Raster 6 select all, float, defloat, paste Paper3 onto canvas, invert and hit delete.  Unselect.  Repeat for Copy of Raster6 Layer.

On Raster 5 select all, float, defloat, paste Paper1 onto canvas, invert and hit delete.  Unselect.

On Raster 2 select all, float, defloat, paste Paper2 onto canvas, invert and hit delete.  Unselect.

Element Instructions:
All Elements are resized by 75% unless other wised stated.

Paste Element64 resize once and move to the top left. 

Paste Element57 resize twice and move to the top right.

Paste Element40 resize three times and move to the top.    Add an inner bevel of choice.  I used the settings of bevel7, 16, 18, 2, 24, 15, 315, 50, 30 color white.
Add a drop shadow of choice.  I used the settings of 4, 4, 75, 10.

Paste Element39 resize, and move just below Element57 and move down in the layer palette.

Paste Element38 resize twice.  Move to the bottom right and free rotate 15 degrees to the right.

Paste Element35 resize three times.  Move to the bottom left.  Mirror.

Paste Element33 resize three times.  Move to the bottom left.  Left of Element 35.

Paste Element36 resize twice.  Move to the bottom right.  Free rotate 15 degrees to the left mirror.

Paste Element 37 resize three times.  Move to the bottom left just in front of the shoes.

Paste Element1 resize twice and place between the shoes. Mirror.

Paste Element2 resize three times.  Free rotate 15 degrees to the left.  Move to the top.  See my tag for placement.

Paste Element5 resize.  Move just below the othe elements on the bottom.

Paste Element16 resize twice and place behind and to the right of the cat.

Paste tube of choice.  Add copyright and save as a psp or psd.

Add name and any other embelishments.  Resize as needed and save as a png.  And you are done. 

Thank you for taking a look at my tut.